Required information for F series

Please,

send us basic information about your car:

  1. model: 523i/525i/530i;
  2. mileage
  3. short description of the problem

 

Note: INPA for F series, MSD87 loader 3.700 required.

 

  1. warm-up engine till working temperature* (at least 90 oC, can be monitored at: ../F5/F1/F2 using INPA),
  2. drive at least few km with speed at least 20km/h,
  3. stop the car (don’t switch off the engine) and make following screenshots at idle.

 

********************************************************************************

  1. ../F4/F1 [errors, Main list, + don’t forget scroll down till the end of the list]
  2. ../F4/F3 [errors, History list, + don’t forget scroll down till the end of the list]
  3. ../F5/F4 [VANOS]
  4. ..F5/F5/F2  [IBS/Battery data]
  5. ../F5/F5/F3 [IBS/Battery data]
  6. ../F5/F1/F1 [basic parameters of engine, + don’t forget scroll down till the end of the menu]
  7. ../F5/F1/F2 [basic parameters of engine, + don’t forget scroll down till the end of the menu]
  8. ../F5/F1/Shift+F1 [oil sensor]
  9. ../F5/F6 [fuel mixture, + don’t forget scroll down till the end of the menu]
  10. ../F5/F7 [rough run menu]
  11. ../F5/F9 [injectors live data/idle, + don’t forget scroll down till the end of the menu]
  12. ../F5/Shift+F3 [injectors tests/partial load, + don’t forget scroll down till the end of the menu]
  13. ../F6/F2/F5 [NOx converter menu]

Switch off engine, then turn on again, wait at least 30 seconds (don’t press accelerator pedal)**

  1. ../F5/F6 [fuel mixture, + don’t forget scroll down till the end of the menu]
  2. ../F5/F7 [rough run menu]
  3. ../F5/F9 [injectors live data/idle, + don’t forget scroll down till the end of the menu]

 

*temperature of the engine:

**guaranteed Homogeneous injection mode